Would California bridges stand up to a direct hit? We asked experts

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.

Baltimore’s Francis Scott Key Bridge stood little chance of survival Tuesday when a cargo ship rammed into it: Its vertical support structure seemed flimsy for a bridge spanning such a busy port, experts said, and did not appear to be protected by a substantial impact barrier.

Tuesday’s incident happened just before 1:30 a.m., when a 948-foot-long cargo vessel dubbed Dali lost power as it was leaving Baltimore’s port at a speed of 8 knots.

When the ship rammed into one of the bridge’s support piers, the structure began to shatter almost instantly. Within seconds, the southern and central spans began to collapse, then the northern span. In 25 seconds, the entire bridge had plunged into the Patapsco River.

Officials say six members of a construction crew that was working on the bridge were unaccounted for as of Tuesday afternoon, and other victims could still be discovered.

Experts say the Baltimore collapse does not expose significant vulnerabilities to major bridges near ports across California. The state is home to the nation’s busiest two ports, in Los Angeles and Long Beach, which handle about 40% of U.S. container imports from Asia. The Los Angeles port saw 1,712 vessels arrive in 2023.

Dr. Robert Dowell, an associate professor of structural engineering at San Diego State University, said California’s major bridges are less at risk of being toppled by errant cargo ships because their support columns have been retrofitted to withstand major earthquakes.

“If they were seismically retrofitted, they would be strengthened, and you wouldn’t expect as fragile vertical members as what you saw supporting the Baltimore bridge,” Dowell said.

California’s major bridges typically have solid supports and substantial bumpers that offer protection from collisions, Dowell said.

The Francis Scott Key Bridge, he noted, seemed vulnerable for its location in a key shipping hub. Its support pier did not appear to have a large enough bumper surrounding it, he said, and the pier itself was not one solid structure but made up of multiple vertical members. It appears from zoomed-in video of the bridge collapse that the ship’s impact caused the failure of one of those vertical members first, overloading the others at that pier, resulting in the collapse of the main span.

Such a vertical support, Dowell said, was “a little bit unusual to be so fragile, when huge ships are coming through the shipping channel.” However, even with such a fragile pier, if a proper bumper had been installed around the base, it would have protected against direct impact and saved the bridge, he said.

“You would think, if that’s where the large ships are supposed to go, you would have that protected, for sure,” Dowell said. “If it was a solid, reinforced concrete column … supporting the bridge, it probably wouldn’t have collapsed in this case,” Dowell added, even without a proper bumper.

California has hundreds of steel truss bridges, but none that cross a major span of water or are located near a port.

California’s ports generally face open water, while ships must travel far inland through the Chesapeake Bay and Patapsco River to reach the Port of Baltimore.

It’s not quite fair to compare the two Southern California bridges near the state’s largest ports with the Baltimore bridge, said James Fawcett, an adjunct professor of environmental studies at the University of Southern California who worked for years with USC’s Sea Grant Program, where he focused on ports and shipping.

The Vincent Thomas and Long Beach International Gateway bridges are significantly shorter than the Key Bridge in Maryland, he said, and their positioning in relation to the ports minimize concerns about bridge damage.

“Typically, container ships can access the Port of L.A. and Port of Long Beach without ever going under a bridge,” Fawcett said.

He said the California port with the most similarities — though still not a direct comparison — would be the Port of Oakland, as most large ships there have to navigate under the Golden Gate Bridge and the San Francisco-Oakland Bay Bridge, the latter of which has multiple supports across the bay.

Khalid M. Mosalam, professor of civil engineering and director of the Pacific Earthquake Engineering Research Center at UC Berkeley, said California’s focus on seismic design as it retrofitted bridges since the late 1980s made its bridges more resilient.

“Whether they are able to take such a huge impact, I’m not sure,” Mosalam said. “But definitely they are more robust and larger than the support I saw in some of the images.”

Installing bumpers, he said, would play a big role in minimizing damage.

“The fender system will reduce the impact for sure, because it will dissipate some of this big energy due to the impact. It’s like the shocks you have in your car, when you hit a bump in the road and absorb some of this energy, and you don’t feel it that big.”

In 2007, the Bay Bridge narrowly escaped major damage from a container ship that sideswiped a pier support, leaving a gash nearly 100 feet long in the side of the ship and breaching fuel tanks that set off a major oil spill. While the spill was devastating to the bay, the 8.4-mile bridge and its stability were not affected, according to a National Transportation Safety Board report.

The collision did, however, damage the “fendering system” that surrounds the base of the support tower, which helps protect the bridge from a ship or other impact. The system was repaired, but the Metropolitan Transportation Commission, which oversees Bay Area transit, is seeking federal funds to update and improve it, according to spokesperson John Goodwin.

He said a catastrophe like the one in Baltimore could conceivably happen in Oakland, as seen in 2007.

“A few years ago, it damn near did,” Goodwin said. “Thank heavens for the fenders we have at the Bay Bridge and elsewhere — that protected the Bay Bridge back in 2007.”

Fawcett said he was surprised, based on the videos he saw, that the container ship in Baltimore had so few tugboats helping it navigate through the narrow waterways.

“She apparently didn’t have adequate tugs for this situation,” Fawcett said. “It would have been wise perhaps to have more tugs assisting the vessel.”

Cargo ships have gotten larger over the decades, with many weighing more than 100,000 tons.

Andy Herrmann, former president of the Structural Engineering Institute, agreed that the Baltimore bridge did not appear to have a substantial buffer or enough column support to sustain a vessel crash.

“It looked like they had cylindrical piles going down, but they were not very large,” Herrmann said.

Baltimore’s Francis Scott Key Bridge collapse halted shipping traffic at one of the most important ports on the East Coast.

(Al Drago / Bloomberg via Getty Images)

Bridge specifications changed in the 1990s to account for collisions from massive cargo vessels like the one that killed 35 people in 1980 along the Sunshine Skyway Bridge in Florida.

A seagoing freighter as long as two football fields slammed into a support pier and the bridge connecting Lower Tampa Bay to St. Petersburg. The collapse plunged a Greyhound bus and seven other cars into the bay.

“When they rebuilt it, they actually put an island in front of the piers, so that any shipping [vessel] that would get close to the piers, that could possibly take it down, went aground before they hit it,” Herrmann said.

Mehni Kashani, an associate professor of structural engineering at the University of Southampton in London, said impact barriers have become common practice in bridge construction around the globe, ensuring that if a ship veers off-course, any impact won’t affect a key support. He has worked on constructing such barriers for bridges and structures along the River Thames, which connects London’s largest port to the Atlantic Ocean.

Kashani said retrofitting a bridge to add impact barriers, while costly, is possible to do without directly affecting the structure, because the barriers can be built around existing supports.

San Francisco’s Golden Gate Bridge, despite being built in 1937, has a barrier around its south support tower, which sits on a pier mid-channel most directly in the path of ship traffic, according to Paolo Cosulich-Schwartz, spokesperson for the Golden Gate Bridge Highway and Transportation District.

The bridge’s north tower sits partly on land, and any large ship would run aground before colliding with it, he said.

“The Golden Gate Bridge has the most robust ship collision protection of any bridge on the West Coast,” Cosulich-Schwartz said. “There’s basically a moat or buffer zone around the [south tower] pier.”

That barrier, he said, protects an area the size of a football field with a bumper made of concrete and filled with sand.

Despite shipping containers regularly passing under the iconic bridge, it would be highly unlikely for a wayward boat to affect it, Cosulich-Schwartz said, noting that even though the barrier dates from the bridge’s original construction, recent inspections have found it to be in good condition.

“We’re confident that the system is strong and would protect the Golden Gate in the case of an incident similar to the one we saw in Baltimore,” he said.

In Southern California, the Long Beach International Gateway — a bridge that connects Terminal Island and Long Beach near the ports of Long Beach and Los Angeles — has supports only on land, so it’s “impossible to hit that bridge,” said Capt. James Kipling Louttit, executive director of the Marine Exchange of Southern California, which provides vessel traffic services for the port.

The other nearby bridge, the Vincent Thomas — which connects San Pedro to Terminal Island — has supports in the water, but both are positioned very close to land.

Times Staff Writer Sarah D. Wire contributed to this report.